What are you looking for?
Enter search term
We are sorry!
Unfortunately no results were found.
Filter
Max. operating pressure
Pressure series
Sealing form 2
External Ø nom.
Opening pressure
Internal Ø nom.
Temp. max.
Temp. range
Design
Outer layer
DN*
DN
AF
Construction
Profile
Sealing form 1
Voltage
Temp. min.
Approval
Operating pressure
Media
Design
Series
BD* at 20 °C
Operating pressure
Connection 4
Connection 3
G1
Size
External pipe Ø
G2
Connection 2
Application
Type
B
Series
Connection 1
Connection
Sealing form 3
Output pressure
Standard
Inner layer
Material
Insert
Max. operating pressure
0 - 35 bar, maximum static working pressure (non-pulsating)
max. 10 bar
max. 350 bar
max. 16 bar
max. 700 bar
-0.99 bar - 15 bar
0 - 10 bar
max. 250 bar
60 bar
0 - 35 bar
max. 315 bar
1.5 - 8 bar
max. 40 bar
max. 400 bar
2.5 - 10 bar (monostable), 1.0 - 10 bar (bistable), vacuum up to 10 bar (in case of external supply air)
dependent on operating temperature; max. 10 bar (at 20 °C); max. 1 bar (at 60 °C)
max. 12 bar
max. 16 bar (at +20 °C)
0.5 - 10 bar
max. 20 bar
max. 300 bar
P, A, Bcolon max. 350 bar / Tcolon max. 210 bar
max. 1 bar
0 - 8 bar
max. 63 bar (depending on temperature and nominal size)
2 - 10 bar
dependent on operating temperature; max. 10 bar (at 20 °C); max. 1 bar (at 170 °C)
dependent on operating temperature; max. 10 bar (at 20 °C); max. 2.5 bar (at 90 °C)
up to 400 bar
max. 410 bar
max. 8 bar
up to 18 bar
2.5 - 10 bar
P, A, Bcolon max. 350 bar / Tcolon max. 160 bar
max. 200 bar (acc. to DIN EN 982)
max. 25 bar
max. 250 bar brass, max. 400 bar if steel / stainless steel
max. 70 bar (depending on temperature and nominal size)
0.5 - 60 bar
1 - 10 bar
2.5 - 10 bar (monostable), 1.0 - 10 bar (bistable), vacuum up to 10 bar (external pilot air)
2.5 - 10 bar; Max. vacuum 10 bar (external pilot air)
2.5 - 7 bar
P, A, Bcolon max. 220 bar / Tcolon max. 80 bar
See table. Values referred to a medium temperature of 50 °C (static working pressure)
max. 150 bar
-0.99 - 20 bar
0.5 - 12 bar
1 - 35 bar and rough vacuum
liquidscolon 40 / 32 bar depending on the port size; gascolon max. 5 bar (MOP 5)
max. 12 bar, static working pressure (non-pulsating)
max. 15 bar
max. 40 bar (to DN 32); max. 25 bar (from DN 40); max. 16 bar (from DN 65)
max. 64 bar
vacuum up to 10 bar
0.2 - 50 bar
10 bar
2.5 - 8 bar
250 bar
DN 15 - DN 32colon max. 40 bar; DN 40 - DN 50colon max. 25 bar
P, A, Bcolon max. 315 bar / Tcolon max. 160 bar
P, A, Bcolon max. 315 bar / Tcolon max. 210 bar
max. 14 bar
max. 16 bar for valves with cutting ring connection; max. 4 bar for valves with pipe thread
max. 160 bar (G 3/8″, G 1/2″); max. 100 bar (G 3/4″, G 1″); max. 60 bar (G 1 1/4″, G 1 1/2″); max. 40 bar (G 2″)
max. 18 bar
max. 210 bar
max. 28 bar
max. 315 bar with leak oil port / max. 200 bar without leak oil port
max. 420 bar
max. 63 bar
min. 0.35 bar; max. 8.5 bar
0 - 16 bar
0.2 - 26 bar
0.5 - 20 bar
0.99 - 20 bar
15 bar (12 bar at G 1″)
16 bar
2 - 16 bar
2 - 25 bar
2.5 - 10 bar (monostable, 1.0 - 10 bar (bistable), vacuum to 10 bar
4.5 bar
5 bar
DN 15 - DN 50colon max. 40 bar; DN 65 - DN 100colon max. 16 bar
Max. 16 bar; 13.5 x 9.5 mm hosecolon max. 12 bar
P, A, Bcolon max. 315 bar / Tcolon max. 160 bar (VDC) / Tcolon max. 120 bar (V AC)
P, A, Bcolon max. 350 bar / Tcolon max. 100 bar
P, A, Bcolon max. 350 bar / Tcolon max. 120 bar
P, A, Bcolon max. 350 bar / Tcolon max. 210 bar (VDC) / Tcolon max. 105 bar (V AC)
P, A, Bcolon max. 350 bar / Tcolon max. 210 bar (VDC) / Tcolon max. 140 bar (V AC)
max. 10 bar (to the temperature +20 °C); max. 7 bar (at temperature +40 °C); max. 5 bar (at temperature +60 °C)
max. 1000 bar
max. 11 bar
max. 12 bar (K-07100622); max. 20 bar (K-07100623)
max. 200 bar
max. 220 bar
max. 24 bar
max. 25 bar (on stem)
max. 25 bar (on thermowell)
max. 250 bar with aluminium housing / max. 350 bar with steel housing
max. 320 bar
max. 400 bar (at 20 °C); max. 250 bar (at G 1 - 20 °C)
max. 500 bar
max. 55 bar (depending on temperature and nominal size)
max. 6 bar
max. 6 bar (copper alloy), max. 25 bar (stainless steel)
max. 6 bar (on thermowell)
max. 630 bar
max. 70 bar (depending on operating temperature)
max. 9 bar
min. 0.0 bar; max. 15.0 bar
min. 2 bar; max. 6 bar
min. 4 bar; max. 16 bar
saturated steam max. 6 bar hot water max. 18 bar
up to 150 bar, up to 400 bar with support ring
up to 250 bar
up to 500 bar
Pressure series
Sealing form 2
24° inner cone
24° outer cone with O-ring
45° outer cone
60° inner cone
60° outer cone
60° outer cone with O-ring
74° inner cone
74° outer cone
brass seal with rubber insert
BUNA N rubber sealing ring
butt construction
cutting ring connection
flat seal
flat seal + shape B
flat seal with O-ring
for screw-in pins with shapes A, B and if necessary E
moulded seal made of black nitrile
NBR form sealing ring
O-ring and retaining ring
O-ring sealed socket
pipe socket with cutting ring
rubber sealing ring
shape A
shape E
shape F
special screw-in hole
thread seal
External Ø nom.
4.0 mm
5.0 mm
5.1 mm
5.5 mm
6.0 mm
7.0 mm
8.0 mm
8.1 mm
8.3 mm
8.7 mm
8.9 mm
9.0 mm
9.2 mm
9.3 mm
9.5 mm
9.6 mm
9.7 mm
10.0 mm
10.2 mm
10.5 mm
10.7 mm
11.0 mm
11.2 mm
11.5 mm
11.7 mm
11.9 mm
12.0 mm
12.2 mm
12.5 mm
12.6 mm
12.7 mm
13.0 mm
13.1 mm
13.2 mm
13.3 mm
13.4 mm
13.5 mm
13.6 mm
13.7 mm
14.0 mm
14.1 mm
14.2 mm
14.3 mm
14.4 mm
14.5 mm
14.7 mm
14.8 mm
14.9 mm
15.0 mm
15.3 mm
15.5 mm
15.6 mm
15.7 mm
15.9 mm
16.0 mm
16.2 mm
16.4 mm
16.6 mm
16.7 mm
16.9 mm
17.0 mm
17.2 mm
17.3 mm
17.4 mm
17.8 mm
18.0 mm
18.1 mm
18.3 mm
18.4 mm
18.5 mm
18.7 mm
18.8 mm
19.0 mm
19.2 mm
19.4 mm
19.5 mm
19.6 mm
19.7 mm
19.8 mm
19.9 mm
20.0 mm
20.2 mm
20.3 mm
20.4 mm
20.6 mm
20.7 mm
21.0 mm
21.3 mm
21.4 mm
21.5 mm
21.6 mm
21.7 mm
21.9 mm
22.0 mm
22.2 mm
22.3 mm
22.9 mm
23.0 mm
23.1 mm
23.2 mm
23.7 mm
23.8 mm
23.9 mm
24.0 mm
24.5 mm
24.6 mm
24.7 mm
24.8 mm
24.9 mm
25.0 mm
25.1 mm
25.8 mm
25.9 mm
26.0 mm
26.1 mm
26.2 mm
26.4 mm
26.5 mm
26.6 mm
26.7 mm
26.9 mm
27.0 mm
27.1 mm
27.4 mm
27.7 mm
27.8 mm
27.9 mm
28.0 mm
28.1 mm
28.5 mm
28.6 mm
29.0 mm
29.2 mm
29.3 mm
30.0 mm
30.5 mm
30.7 mm
31.0 mm
31.1 mm
31.3 mm
31.4 mm
31.7 mm
32.0 mm
32.2 mm
32.5 mm
33.0 mm
33.1 mm
33.3 mm
33.4 mm
33.5 mm
34.0 mm
34.2 mm
34.9 mm
35.4 mm
35.6 mm
35.9 mm
36.0 mm
36.4 mm
36.6 mm
37.0 mm
37.5 mm
37.9 mm
38.0 mm
38.1 mm
38.2 mm
38.3 mm
39.0 mm
39.3 mm
39.5 mm
40.0 mm
40.1 mm
40.4 mm
41.6 mm
42.0 mm
42.3 mm
43.0 mm
43.3 mm
43.6 mm
43.7 mm
44.0 mm
44.4 mm
45.0 mm
45.2 mm
45.6 mm
45.9 mm
46.0 mm
46.6 mm
46.7 mm
47.5 mm
47.6 mm
48.0 mm
49.0 mm
49.5 mm
50.0 mm
50.4 mm
50.5 mm
50.9 mm
51.0 mm
51.5 mm
51.6 mm
52.0 mm
53.5 mm
54.0 mm
55.0 mm
56.0 mm
57.3 mm
57.5 mm
58.0 mm
59.0 mm
60.0 mm
61.0 mm
61.1 mm
64.0 mm
64.2 mm
64.5 mm
66.0 mm
68.0 mm
69.0 mm
71.5 mm
72.0 mm
72.5 mm
75.0 mm
75.5 mm
77.0 mm
78.5 mm
79.0 mm
79.5 mm
83.0 mm
83.5 mm
87.0 mm
89.9 mm
90.0 mm
91.0 mm
92.0 mm
101.0 mm
104.0 mm
107.0 mm
116.3 mm
118.0 mm
120.0 mm
146.0 mm
149.0 mm
172.0 mm
174.5 mm
225.0 mm
229.0 mm
276.0 mm
281.0 mm
Opening pressure
0.2 bar
0.25 bar
0.27 bar
0.3 bar
0.35 bar
0.38 bar
0.4 bar
0.45 bar
0.5 bar
0.5 to 1.0 bar
0.55 bar
0.6 bar
0.65 bar
0.7 bar
0.75 bar
0.8 bar
0.83 bar
0.9 bar
1.0 bar
1.0 to 4.0 bar
1.1 bar
1.2 bar
1.25 bar
1.3 bar
1.4 bar
1.5 bar
1.6 bar
1.7 bar
1.75 bar
1.8 bar
1.9 bar
10.0 bar
10.0 to 18.0 bar
10.1 bar
10.2 bar
10.3 bar
10.4 bar
10.5 bar
10.6 bar
10.7 bar
10.8 bar
10.9 bar
11.0 bar
11.2 bar
11.3 bar
11.4 bar
11.5 bar
11.6 bar
11.7 bar
11.76 bar
11.8 bar
12.0 bar
12.1 bar
12.2 bar
12.3 bar
12.4 bar
12.5 bar
13.0 bar
13.2 bar
13.3 bar
13.5 bar
13.8 bar
14.0 bar
14.2 bar
14.3 bar
14.5 bar
14.7 bar
14.8 bar
15.0 bar
15.1 bar
15.2 bar
15.3 bar
15.4 bar
15.5 bar
15.6 bar
15.7 bar
15.8 bar
16.0 bar
16.0 to 32.0 bar
16.5 bar
16.8 bar
16.9 bar
17.0 bar
17.1 bar
17.5 bar
17.6 bar
18.0 bar
18.5 bar
18.9 bar
19.0 bar
19.1 bar
19.4 bar
19.5 bar
19.6 bar
19.7 bar
19.8 bar
2.0 bar
2.1 bar
2.2 bar
2.3 bar
2.4 bar
2.5 bar
2.6 bar
2.7 bar
2.8 bar
2.9 bar
20.0 bar
20.5 bar
20.8 bar
21.0 bar
21.5 bar
22.0 bar
22.1 bar
22.5 bar
22.7 bar
22.8 bar
23.0 bar
23.1 bar
23.2 bar
23.4 bar
23.5 bar
24.0 bar
24.5 bar
25.0 bar
25.2 bar
25.5 bar
26.0 bar
26.5 bar
26.6 bar
27.0 bar
27.2 bar
27.5 bar
27.6 bar
27.9 bar
28.0 bar
28.5 bar
28.6 bar
29.0 bar
29.4 bar
29.5 bar
3.0 bar
3.0 to 7.0 bar
3.1 bar
3.2 bar
3.3 bar
3.4 bar
3.5 bar
3.6 bar
3.7 bar
3.8 bar
3.9 bar
30.0 bar
30.0 to 60.0 bar
30.5 bar
30.8 bar
31.0 bar
31.5 bar
32.0 bar
32.5 bar
33.0 bar
33.3 bar
33.5 bar
33.7 bar
34.0 bar
34.1 bar
34.5 bar
35.0 bar
35.5 bar
36.0 bar
36.3 bar
36.4 bar
36.5 bar
36.8 bar
37.0 bar
37.5 bar
38.0 bar
38.5 bar
39.0 bar
39.5 bar
4.0 bar
4.1 bar
4.2 bar
4.3 bar
4.4 bar
4.5 bar
4.6 bar
4.7 bar
4.8 bar
4.9 bar
40.0 bar
40.5 bar
41.0 bar
41.5 bar
42.0 bar
43.0 bar
43.4 bar
43.5 bar
44.0 bar
44.8 bar
45.0 bar
46.0 bar
47.0 bar
47.5 bar
48.0 bar
5.0 bar
5.1 bar
5.2 bar
5.3 bar
5.4 bar
5.5 bar
5.6 bar
5.7 bar
5.8 bar
5.9 bar
50.0 bar
6.0 bar
6.0 to 12.0 bar
6.1 bar
6.2 bar
6.3 bar
6.4 bar
6.5 bar
6.6 bar
6.7 bar
6.8 bar
6.9 bar
7.0 bar
7.1 bar
7.2 bar
7.3 bar
7.4 bar
7.5 bar
7.6 bar
7.7 bar
7.8 bar
7.9 bar
8.0 bar
8.1 bar
8.2 bar
8.3 bar
8.4 bar
8.5 bar
8.6 bar
8.7 bar
8.8 bar
8.9 bar
9.0 bar
9.1 bar
9.2 bar
9.3 bar
9.4 bar
9.5 bar
9.6 bar
9.7 bar
9.8 bar
9.9 bar
approx. 1 bar
Internal Ø nom.
2.0 mm
2.7 mm
3.0 mm
3.2 mm
3.3 mm
4.0 mm
4.5 mm
4.8 mm
5.0 mm
5.1 mm
5.5 mm
6.0 mm
6.2 mm
6.3 mm
6.4 mm
6.5 mm
6.6 mm
7.0 mm
7.5 mm
7.9 mm
8.0 mm
8.1 mm
8.2 mm
8.3 mm
9.0 mm
9.5 mm
9.6 mm
9.7 mm
9.8 mm
9.9 mm
10.0 mm
10.3 mm
11.0 mm
11.5 mm
12.0 mm
12.2 mm
12.5 mm
12.7 mm
12.8 mm
13.0 mm
13.4 mm
14.0 mm
14.3 mm
14.5 mm
15.0 mm
15.1 mm
15.6 mm
15.9 mm
16.0 mm
16.2 mm
16.3 mm
16.4 mm
17.0 mm
17.5 mm
18.0 mm
19.0 mm
19.1 mm
19.4 mm
19.5 mm
19.6 mm
20.0 mm
20.2 mm
20.5 mm
20.6 mm
21.0 mm
21.5 mm
22.0 mm
22.3 mm
22.6 mm
22.8 mm
23.0 mm
23.9 mm
24.0 mm
24.2 mm
25.0 mm
25.4 mm
25.7 mm
25.8 mm
25.9 mm
26.0 mm
27.0 mm
28.0 mm
29.0 mm
29.3 mm
30.0 mm
31.0 mm
31.8 mm
31.9 mm
32.0 mm
32.5 mm
33.0 mm
34.0 mm
34.6 mm
35.0 mm
35.5 mm
36.0 mm
38.0 mm
38.1 mm
38.5 mm
40.0 mm
42.0 mm
43.2 mm
43.5 mm
44.0 mm
44.5 mm
45.0 mm
49.0 mm
50.0 mm
50.8 mm
51.0 mm
51.4 mm
53.1 mm
55.6 mm
56.5 mm
57.0 mm
60.0 mm
63.0 mm
63.5 mm
64.0 mm
64.5 mm
66.2 mm
70.0 mm
75.0 mm
76.0 mm
76.2 mm
80.0 mm
80.2 mm
81.0 mm
90.0 mm
99.0 mm
100.0 mm
101.6 mm
102.0 mm
110.0 mm
113.2 mm
127.0 mm
150.0 mm
152.0 mm
152.4 mm
203.0 mm
203.2 mm
254.0 mm
Temp. max.
Temp. range
(-20 °C to +80 °C quickconnect-safety couplings)
-10 °C to +100 °C
-10 °C to +150 °C
-10 °C to +50 °C
-10 °C to +50 °C (piston diameter 40 mm), -10 °C to +60 °C (piston diameter 63 mm)
-10 °C to +60 °C
-10 °C to +60 °C (Ø 20 to Ø 63)
-10 °C to +70 °C (Ø 80 to Ø 125)
-10 °C to +75 °C (plug amplifier), -10 °C to +60 °C (chopper amplifier)
-10 °C to +80 °C
-10 °C to +80 °C (Ø 80 to Ø 100)
-15 °C to +80 °C
-20 °C to +100 °C
-20 °C to +120 °C
-20 °C to +120 °C (G 3/4″ to G 2″)
-20 °C to +180 °C
-20 °C to +300 °C (at 20 bar)
-20 °C to +50 °C
-20 °C to +60 °C
-20 °C to +70 °C
-20 °C to +70 °C (Ø 32 to Ø 63)
-20 °C to +80 °C
-20 °C to +80 °C (G 1/4″ to G 1/2″)
-25 °C to +100 °C
-25 °C to +125 °C
-30 °C to +100 °C
-30 °C to +150 °C
-30 °C to +200 °C
-40 °C to +140 °C
-40 °C to +1400 °C
-40 °C to +200 °C (depending on the hose quality and diameter)
-40 °C to +80 °C
-40 °C to +90 °C
-5 °C to +45 °C
-50 °C to +210 °C
-60 °C to +150 °C
0 °C to 50 °C
0 °C to 60 °C
0 °C to 70 °C
0 °C to 80 °C
0 °C to 90 °C
164 °C (saturated steam), 95 °C (hot water)
5 °C to 80 °C
5 °C to 90 °C
air (max. 75 °C)
air: -20 °C to +130 °C
air: -20 °C to +150 °C
aluminium from -196 °C to 150 °C
ambient -20 °C to +60 °C
can be used up to 400 °C
can be used up to 650 °C
from -20 °C to 130 °C depending on the material
from -200 °C to 260 °C
from -25 °C to 110 °C
from -35 °C to 85 °C
gas: - 20 °C to + 60 °C
hot air +180 °C
hot water up to +120 °C
limited to 70°C for air and water based fluids
max. +150 °C
max. 50 °C (G 1/8″), max. 90 °C (G 1/4″, G 3/8″)
max. 60 °C
max. 75 °C
max. 95 °C (depending on the medium)
medium max. +60 °C
min. flexible to -35 °C
min. shrinking temperature of 110 °C
min. shrinking temperature of 125 °C
mineral oil -30 °C to 100 °C
mineral oils and fuel oil grades EL and L, 6 bar and up to 80 °C
miscellaneous: -20 °C to +150 °C
PU18: -30 °C to +100 °C
PU33: -40 °C to +120 °C
saturated steam up to +210 °C
shrinking temperature above 90 °C to 200 °C
standard version -15 °C to +80 °C
temperature peaks up to 110 °C
temperature peaks up to 120 °C
Type 1: -10 °C to +80 °C
Type 2: -40 °C to +80 °C
Up to +130 °C
Up to +70 °C
vegetable oil -15 °C to 80 °C
water + antifreeze agent -50 °C to +150 °C
water: (0 °C to +120 °C)
water: (0 °C to +130 °C)
water: (0 °C to +150 °C)
water: (0 °C to +80 °C)
Design
2 piece hose clamps
3-way ball valve, in forged design
360° axial rotation
45° SAE connection
45° SAE external thread, outer cone long pilot for 5400 coupling
AC-CLIP system
adapter for test connection
adjustable bulkhead fitting socket
adjustable direction fitting
adjustable direction screw-in fitting
adjustable direction screw-in socket
against + switching
aluminium bracket
aluminium flat jacket
angle connector with wall connecting plate
anodised aluminium
assembly pliers for seals
assortment box
ball seat valve (ball seat, brass)
banjo coupling, throttle free
banjo couplings, throttle free (high pressure)
banjo fitting
blank coupling cap
blanking cap
blanking nut
blanking screw, with hexagon head
blanking screw, with hexagon socket
blanking socket
blanking socket, with hexagon head
blanking socket, with hexagon socket
bonded seal
bourdon tube pressure gauge without glycerine filling
Brass sleeve for claw coupling with brass seal.
bulkhead connector
bulkhead fitting
bulkhead fitting socket
bulkhead screw-in fitting
bulkhead socket weld fitting
cable connector for sensors with M 12 port
cable glands in accordance with ATEX, IECEx and EAC
cap coupling
cap fire hose coupling with chain
cap with seal
centrifugal principle-filter
centrifugal principle-filter, membrane pressure regulator with secondary venting, oil mist lubricator
Cetop square flange
chevron piston ring
chevron ring
chevron rod ring
clamp ring
clamping shells
claw hose coupling
claw outer thread coupling
claw-inner thread coupling
compact form
complete clamp
complete pistons
compressed air tank
connecting reducing fittings
connecting socket (short pipe bend)
connection socket
connector
connector for measuring hose lines
connector, O-ring sealed outer thread
connectors
connectors, ring thread piece
copper conduit tube
counter nut
counter nut for bulkhead fittings
coupling with bulkhead connection
coupling with PVC hose
cutting ring
cutting ring gauge
cutting ring with O-ring
diaphragm pressure regulator with relieving, centrifugal filter
diaphragm pressure regulator with relieving, centrifugal principle-filter, oil mist lubricator
diaphragm pressure regulator with secondary venting
digital flow switch
direct pressure gauge connection
distributors
double conical ring
double guide ring
double hollow screw
double hose connection
double pipe clamp
double wiper seal
drain valve
dummy couplings
edge sealing ring
elastomer insert
fiber filter
fitting set for O-ring
fitting socket
fitting, double nuts
fixed coupling with inner thread
fixed coupling with outer thread
flare cone 10°
flare connection with 2 O-rings
flat lubricating nipple
flat seal
flat seal for fixed coupling with inner thread
for bulkhead mounting
for double-acting cylinders
for screw fittings
for single and twin pipe clamps
for single tube clamps
for single-acting cylinders
for twin pipe clamps
funnel-type lubricating nipple
gear hose clamps
guide band
guide ring
heavy design
hexagon screw
hexagon socket screw
hinge bolt clamp
holder for loose half
hollow screw
hose clamp
hose connectors
hose line DN 2 with M 12.65 x 1.5 measuring connections
hose line DN 2 with M 16 x 1.5 measuring connections
hose line DN 2 with M 16 x 2 measuring connections
hose line DN 2 with measuring connections M 16 x 2 and plug-in
hose line DN 2 with plug-in measuring connections
hose ring for claw coupling with brass seal
hydraulic-type lubricating nipple
installation preferably vertical, gas side top
installation set for seals
internal measuring probe
light design
lock washer
lock without union nut
maintenance-free PTFE coated friction bearing
measuring cone for O-rings
measuring connection with 24° sealing head (DKO)
MODY hose coupling
MODY inner thread coupling
MODY outer thread coupling
multi-lubrication friction bearing in rolled bronze
multi-lubrication, POM coated friction bearing
multi-purpose jet nozzle
multicoupling
non-releasing cable tie
non-return valve, connector
non-return valve, screw-in connection
O-ring
O-ring cord
O-ring sealed pin
O-ring sealed pipe connection and filling valve (low side), long pilot
O-ring sealed pipe connection and filling valve, long pilot
O-ring sealed pipe connection for flange assembly, long pilot
O-ring sealed pipe connection with flange, long pilot
O-ring sealed pipe connection, long pilot
operated by secondary pressure
pipe clamp
pipe sockets
piston packing set
piston seal
piston wiper
plug in connector
plug with central screw, type A
pneumatic actuators, in double- or single acting version
pneumatic actuators, in double- or single acting version, with integrated end-position indicator
pneumatic, double-piston, part-turn actuator, double-rocker principle
poppet valve, spring-loaded
pre-assembled
pre-assembly sockets
precision digital pressure switch for excess pressure
precision steel tube, seamless (cold drawn), imperial
precision steel tube, seamless, (cold-drawn), metric
pressure gauge connection fitting
pressure gauge connection socket
pressure gauge fitting
pressure ring for flare connection
pump connection (2 hole)
pump connection (3 hole)
pump connection (4 hole)
push-in connector U-Form
quad ring
quick release coupling plug
quick release coupling plug, DN 7.2
quick release coupling sleeve
rectangular shaped
reducing adapter
reducing adapters
reducing connecting fitting
reducing connecting socket
reducing fitting
reducing fitting, not pre-assembled
replacement chain for sealing claw coupling
replacement seal for EO-2
Replacement sealing ring for GEKA plus water couplings (new version).
replacement sealing ring for GEKA water couplings (old version)
replacement sealing ring for MODY claw coupling
retaining clamp
Retaining screw for claw coupling with brass seal.
rocker mounted on pin
rod lip seal
rod seal
rod seal set
rod U-ring
rod wiper seal
rotary fitting
rotary fitting (bulkhead connector)
rotary fitting (screw-in connector)
rotating claw hose coupling
rotating claw inner thread coupling
rotating claw outer thread coupling
round nut with hexagon socket
rubber ring for claw couplings
rubber ring for MODY couplings
SAE adapter flange with measuring connection
SAE blind plate
SAE block flange
SAE block flange reduction
SAE counter flange fitting
SAE end plate
SAE external thread flange
SAE flange adapter
SAE flange adapter welded on connecting piece
SAE flange clamp
SAE flange head
SAE flare flange
SAE flare flange connector
SAE O-ring
SAE reduction
SAE screw-in counter flange
SAE screw-in flange
SAE sealing counter flange
SAE sealing flange
SAE shim
SAE socket weld counter flange
SAE socket weld flange
SAE socket weld flange connector
SAE split flange clamp
SAE stub end
SAE stub end flange connector
SAE welded on counter flange
SAE welded on flange
SAE welded on flange - imperial
SAE welded on flange connector
safety valve
screw driver for clamps
screw set
screw-in connectors
screw-in fitting
screw-in socket
screw-in socket with measurement connection
screw-in socket with measuring connector
screw-in socket, long
screw-in socket, straight
screw-on connector
screw-on fitting
screw-on socket
screw-on socket, adjustable
screw-on socket, long
screwless hose clamps
seal kit for cylinder HK HFRT
seal kit for guide head
sealing disc for protective caps
sealing plugs for connectors
sealing ring
sealing ring for AC clip nipple
sealing ring for pressure mode
sealing ring for suction and pressure mode
sealing ring for suction mode
series EVN
shuttle valve, connector
single pipe clamp
Snap-tite series 72
Snap-tite series 74
Snap-tite series 75
Snap-tite series 78
Snap-tite series H
soft seal
soft seal for cutting ring
spacer ring for flare connection with 2 O-rings
spring for non-return valve
spring-loaded diaphragm (NBR)
spring-loaded diaphragm (NBR); spring-loaded piston; (10 to 70 bar versions)
spring-loaded diaphragm (UR); spring-loaded piston; (10 to 70 bar versions)
spring-loaded, non-return diaphragm valve with adjustable opening pressure
spring-pipe pressure gauge with glycerine filling
straight connector with screw connection
stroke adjustment screw
suction coupling for outer cover
support ring
support sleeve for flange
tensioning screw clamp
tube bend 90°
tube bending and cutting device
tube bending device
tube bending- and cutting device
tube deburrer
tube support insert
tube to hose connector
tube union
U-ring
U-ring packing set
union function nut
union nut
union nut for flange connection
union nut for flare connection 10°
universal high-pressure seal for a wide range of sectors
WALRING union nut
welded on fitting
welded on sealing cone
welded-on base plate
wiper
with adjusting ring
with feeder under pressure
with insert ring
with lockable safety latch
with plastic screw cap
with rubber foot
with safety collar
with test connection
with union nut
Outer layer
abrasion resistant
abrasion resistant, ozone and weather resistant EPDM rubber
BNBR/EPDM, smooth
Chloroprene rubber
conductive
CR = Moisture absorption values 75% lower than required according to SAE J 2064
environmentally safe, synthetic rubber
EPDM
EPDM (gewickelt)
EPDM (patterned material)
EPDM (smooth)
EPDM-Schlauchdecke, Ozon- und UV-beständig
Flame retardant, oil resistant, weatherproof synthetic rubber
flame-retardant according to MSHA
Natural and synthetic rubber, resistant to abrasion, ozone and weather
NBR
NBR / SBR (patterned material)
none
NR/BR, smooth
NW 4: Polyamide; from NW 6: Polyurethane
Oil resistant and weatherproof synthetic rubber
oil, grease and chemical resistant CR rubber
Oil-resistant, synthetic rubber; flame retardant
one textile braided insert embedded in synthetic rubber
patterned material
Polyamide (PA)
Polyethylene
Polyurethane (PUR)
pricked
PVC
PVC food safe
PVDF
resistant to abrasion, aging and ozone
resistant to ageing, wear and ozone
resistant to ozone and UV radiation
resistant to ozone, weathering, UV, oil and grease
resistant to weather, ozone and UV
round woven polyester fabric
SBR / NBR
SBR smooth
Silicone blue
slightly ribbed outer surface
smooth
Soft PVC
Soft PVC, black, oil resistant
Soft PVC, blue
special synthetic rubber, highly resistant to abrasion, ozone and weather, pricked
stable, high flexibility, smooth plasticised PVC
Synthetic PKR rubber
synthetic rubber
synthetic rubber with additional plastic cover
synthetic rubber with high abrasion resistance
synthetic rubber with high abrasion, ozone and weather resistance, where required as oil and grease resistant
synthetic rubber with high ozone, abrasion, and weather resistance
synthetic rubber with high temperature, ozone and abrasion resistance
synthetic rubber with high temperature, ozone and weather resistance
Synthetic rubber, weather resistant
up to NW 13: Polyurethane; from NW 16: Polyamide
with longitudinal protective ribs
with more than 300 x the abrasion values compared to standard external covers
DN*
DN
AF
4.0 mm
5.0 mm
6.0 mm
7.0 mm
8.0 mm
9.0 mm
10.0 mm
11.0 mm
12.0 mm
13.0 mm
14.0 mm
15.0 mm
16.0 mm
17.0 mm
18.0 mm
19.0 mm
20.0 mm
21.0 mm
22.0 mm
23.0 mm
24.0 mm
25.0 mm
26.0 mm
27.0 mm
28.0 mm
29.0 mm
30.0 mm
31.0 mm
32.0 mm
33.0 mm
34.0 mm
35.0 mm
36.0 mm
37.0 mm
38.0 mm
39.0 mm
40.0 mm
41.0 mm
42.0 mm
43.0 mm
45.0 mm
46.0 mm
48.0 mm
49.0 mm
50.0 mm
51.0 mm
52.0 mm
53.0 mm
54.0 mm
55.0 mm
56.0 mm
57.0 mm
58.0 mm
60.0 mm
62.0 mm
64.0 mm
65.0 mm
66.0 mm
67.0 mm
68.0 mm
69.0 mm
70.0 mm
71.0 mm
72.0 mm
73.0 mm
74.0 mm
75.0 mm
80.0 mm
83.0 mm
85.0 mm
87.0 mm
89.0 mm
90.0 mm
95.0 mm
98.0 mm
100.0 mm
101.0 mm
104.0 mm
110.0 mm
125.0 mm
130.0 mm
Construction
Sealing form 1
24° inner cone
24° inner cone for French series imperial pipe.
24° inner cone for French series metric pipe.
24° outer cone
24° outer cone for French series imperial pipe.
24° outer cone for French series metric pipe.
24° outer cone with O-ring
24°/60° outer cone
24°/60° universal sealing head
37° inner cone JIC
45° inner cone
45° outer cone
60° inner cone
60° outer cone
60° outer cone with O-ring
60° sealing head
74° inner cone
74° inner cone with O-ring
74° outer cone
90° inner cone
BUNA N rubber sealing ring
butt construction
conical seat
conical seat with O-ring
cutting ring connection
cutting ring connection - French series.
edge sealing ring
encapsulated O-ring on screw-in socket
flat seal
flat seal + shape B
flat seal with O-ring
flat seal with pin
flat seal with SAE O-ring
flat seal with SF O-ring
flat seal without pin
for screw-in pins with shape F
for screw-in pins with shapes A, B and if necessary E
form G
metallic
moulded seal made of black nitrile
NBR form sealing ring
O-ring and retaining ring
O-ring seal
O-ring seal on screw-in socket
O-ring sealed
O-ring sealed pin
O-ring sealed socket
ORFS with rotating nut UN/UNF/UNS
outer cone
outer cone with O-ring
pipe socket with cutting ring
pipe socket, pre-assembled
rubber sealing ring
sealed by copper ring
shape A
shape B
shape E
shape F
spherical liner
thread seal
Thread seal, additional 60° inner cone.
welded connection
with thread seal made up of pressure and cord ring
without thread seal
Voltage
10 - 24 V DC
10 V - 30 V DC
10.8 - 30 V DC
12 V
12 V DC
230 / 12 V
230 / 24 V
230 / 50 V
230 V
230 V / 50 Hz
230 V AC / 50 Hz
230 V AC, 50 Hz
230 V, 50 Hz
230/50 V AC, 50 Hz
24 V
24 V DC
24 V DC (for valves and pressure switch)
3 x 400 V
400 V
48 V
8 V
9 V - 36 V DC
max. 230V
max. 24 V
max. 250 V AC
Temp. min.
Approval
3A Sanitary Standard Class II
Approval for all gases according to DVGW Worksheet G 260, DIN 3384
BfR (former BgVV) XXI:2002 (Cat. 2)
BFR CAT III
BFR RECOMMENDATION XXI CAT 2
CE, UL/CSA, RoHS
DIN DVGW
DIN-DVGW approval, BAM-, HTB approved, KTW recommended, WRC approval
DM 21.03.73 E SEGUENTI
DNV-GL, BV, LR, ABS, RINA, FDA, EG 1935/2004 und EU 10/2011
DVGW W543 Water approval up to NW 32
DVGW-approval
DVGW-approval according to DIN 751-1 and DIN 30660
EUROPEAN REGULATION 1935/2004/EC
EUROPEAN REGULATIONS 1935/2004/EC and 10/2011/EC
FDA (CFR 21 §177.2600)
from NW 65
ISO 10993-5,-10,-11:2009
JAPAN MHLW NOTICE NO. 370,1959 AND NO. 201,2006
KTW approval for hot water up to +95 °C and pressures up to 16 bar
KTW guideline "Pipes", DVGW-W270 and DVGW-VP 549 (DVGW reg. no.: DW-0309BT0079)
meets the requirements of BGV D34
MSHA IC-215/0
MSHA IC-84/19
Product certification DV-5142 AU 0166
RAL REGISTRATION G-72
RAL REGISTRATION G-74
The base material has an FDA approval.
The base material has an FDA-approval, EG 1935/2004 and EU 10/2011.
USP XXXII class VI
Operating pressure
0 - 10.0 bar
0 to 1.5 bar
0 to 16 bar
0 to 20.0 bar
130 bar
180 bar
2 to 25 bar
200 bar
220 bar
250 bar
300 bar
350 bar
400 bar
500 bar
max. 210 bar
max. 350 bar
PN 10
PN 100
PN 12
PN 125
PN 129
PN 140
PN 150
PN 154
PN 16
PN 160
PN 195
PN 200
PN 201
PN 210
PN 225
PN 234
PN 242
PN 249
PN 25
PN 250
PN 254
PN 261
PN 270
PN 280
PN 286
PN 294
PN 297
PN 300
PN 305
PN 314
PN 315
PN 316
PN 323
PN 328
PN 334
PN 343
PN 349
PN 35
PN 350
PN 358
PN 360
PN 362
PN 369
PN 372
PN 379
PN 383
PN 393
PN 40
PN 400
PN 414
PN 415
PN 420
PN 424
PN 447